With our GAADI Comfort, changing a flat tyre is a breeze. Within minutes, you can resume your bike ride.

You no longer need to remove the wheel to fit our GAADI Comfort. The easiest way is to put the bike on its side. Use a tyre lever to lift the bicycle tyre off the rim on one side. The defective inner tube must now be removed from the tyre. Simply cut through it with a cutter knife and pull it out. Before the GAADI Comfort is installed, check the bicycle tyre for foreign objects.

Do not inflate the GAADI Comfort with air before installing it. Insert the valve through the valve hole. To prevent the valve from slipping out again, lightly screw the knurled nut onto the valve. Three turns are enough here. The bicycle tube can now be inserted into the space between the tyre and the rim.

Now you just need to lift the tyre back onto the rim. You will need the tyre levers for this again. Check that the tyre is firmly seated on the rim. Finally, fix the valve on the rim by tightening the knurled nut.

Important: Before you inflate the tyre again, it is necessary to straighten the bike so that the weight rests on the flat tyre. Please turn the wheel so that the valve is in the middle at the top. This ensures that the tube always meets at the ‘narrowest point’ when inflating, guaranteeing an optimal fit. This technique prevents the tube from bulging out on one side.

The maximum inflation pressure corresponds to the information on your bicycle tyre.

Please do not forget to screw the cap onto the valve.